Basic Agriculture Engineering MCQs Quiz Test with Solved Answers.
PPSC Agriculture Engineering MCQs with Solved Answers.
#1. Gradually applied load resulting in to equilibrium in a short distance
#2. Additional load to backfill or dead backfill local is called_______________
#3. A chain which is 100 ft long and is divided into 100 links each one foot in length this type of chain is called
#4. total change in the dimension of a body is called.
#5. 1 degree angle is equal to
#6. If the inner or back face of the retaining wall is dragged towards the backfill then the pressure which is exerted on wall is called________________
#7. If fuel is brunt away from the engine cycling than it is called ________________
#8. Temperature of the burning gases in the engine cylinder reaches up to________________
#9. . The part of engine which converts linear ~motion of the piston into rotational motion of flywheel is treaded as________________
#10. To determine the areas of figures plotted to scale, the instrument is called.
#11. Traction means________________
#12. Plane table surveying is a _____method of surveying
#13. It all points in a system move in parallel motion then that system undergoes________________
#14. A fixed reference point of known elevation is called.
#15. The science which deals with relation between forces acting on rigid bodies is
#16. Back sight is also called
#17. The horsepower available on the crankshaft is known as________________
#18. There are ____method of surveying with the plane table
#19. Measurement of the intensity of deformation is called
#20. The graphical inter predation of equations for finding the principals stresses and the maximum share stress at a point in a stressed member is called
#21. Hump is used to________________
#22. Resistance to motion between two bodies in contact with each other is called________________
#23. The load that acts over a considerable length is called
#24. Unit strength of a material is called
#25. Clinometers is usually used to measure
#26. Pressure of backfill material on retaining wall is termed as________________
#27. There are ____type of conditions of equilibrium
PPSC Agriculture Engineering MCQs Quiz Test 8
Related